Innovative bonding of shafts
Wakol offers a new sprayable shoe adhesive with high initial strength and excellent processing properties. WAKOL D 3465 Special Adhesive is suitable for the manufacture of shoe shafts and insoles by hiding all common leather, cushioning and lining materials.
The use of this alkali- and ammonia-free raw material with very low allergenic potential reduces the skin-irritating effect of the adhesive significantly or substantially. Contamination of the adhesive during processing is impossible with the application in the closed container. Only a 10 kg container is connected directly to the spray gun which avoids the former refilling into a pressurised container. Mould formation in pressurised containers is therefore impossible.
The absence of odours (no ammonia) during processing is particularly beneficial. A high initial strength is already achieved with little pressure. In order to control the spray application of the undyed adhesive also on bright lining materials, a UV indicator is added which enables visualisation under black light. Typical spray devices can be used without any problems. Only the selected spray pressure must be readjusted or reduced to 1-2 bar. It is possible to clean the application devices with water. Work benches can also be easily cleaned with little effort. Very high heat resistance allows other work processes such as heatsetter, blow-drying and steaming without any problems. Hydrolysis tests (70°, 7d , 100% RF) permit use in the area of heavy and sports footwear.
Bottenbacher Straße 30
Wakol presents adhesive systems for manufacturing upholstery and mattresses
On the upcoming interzum 2017 in Cologne, Wakol presents adhesive systems for manufacturing upholstery and mattresses.
INTERCOLL D 3447 Roller Adhesive – is a diverse mattress adhesive for the manufacture of all types of mattresses. The water-based 1-C CR-Latex Roller adhesive is solvent-free and characterized by its superb tension stability when wet. The easy assembly and the process reliability are featured by the quick force build-up and the excellent instant tack.
INTERCOLL D 3386 – has been developed for roller and spray application. The very fast drying of the adhesive makes a directly packaging of the mattress possible. It can be used as one-side or contact adhesive for all common mattresses and upholstery materials.
During interzum 2017 Wakol presents live two spray applications:
The 2-C CR-Latex Dispersion Adhesive INTERCOLL D 3453 is used in combination with INTERCOLL D 3437 Aktivator by spray-mix-application. It shows high initial strength for bonding foam materials in a short time.
INTERCOLL D 3460 is a 1-C CR-Latex Dispersion Adhesive can be used at a low spraying pressure, thus reducing the overspray and optimising consumption. The product can be applied using the "free-flow" method. In comparison to the mixed two-component adhesive, INTERCOLL D 3460 contains more solid material and therefore has a lower water content. This adds a drying benefit.
Further information on Wakol at interzum www.interzum.de
WAKOL Sealing Compounds – expanded product range
Wakol presents at Metpack two new additions to its extensive Sealing Compound range.
- WAKOL D 3756 Sealing Compound for Beverage cans
- WAKOL PU 4320 / 4315 Sealing Compound for Food pails and drums.
WAKOL D 3756 Sealing Compound for Beverage cans
WAKOL D 3756 Sealing Compound is a water-based sealing compound based on SBR for beverage application and is suitable for the filling of mineral water, carbonated soft drink, beer as well as dairy products. It shows a very good performance using high throughput application machinery (up to 1500 epm / rotational multi-head liner) applying to small diameters.
It is formulated to achieve virtually no taste or odour influences on filling goods. Therefore WAKOL D 3756 Sealing Compound is suitable for taste-sensitive filling goods like e.g. mineral water.
It complies with latest regulatory requirements, according to European and FDA food contact regulations. TNO and Nehring certificates are available
It shows excellent performance on high-speed rotational multi liners due to low drying tendency on nozzles. Reject rates are exceptionally low. An excellent shear stability provides optimum performance through central supply systems.
WAKOL PU 4320 / 4315 Sealing Compound for Food pails and drums
WAKOL PU 4320 / 4315 Sealing Compound is a two-component, self-blowing polyurethane foam. It was especially developed to form gaskets for pails and drum covers with ring ladge application. For the product, full compliance for food contact according to European Food Contact law has been achieved.
As the foam shows a very good resistance against water, fats, oils and aliphatic solvents it can also be used for the sealing of packaging of aqueous-based products for technical applications, glycols, oils, aliphatic solvents and solid filling materials.
The reaction leads to an elastic and fine-porous gasket with a smooth surface. 2-C-Polyurethane technology offers several advantages: no oven needed, high form stability of the gasket, plasticizer free, low migration, PVC free.
The Wakol exhibition team is looking forward to inform you about the full product range and will be available for further details. Visit Wakol in Hall 3.0 Stand 3A34.
Further information on Wakol at METPACK www.metpack.de
Ny utformning, bättre översikt och snabbare information – WAKOLs produktöversikt för golvmaterial 2017 ...
Nu finns den nya produktöversikten för golvmaterial från WAKOL ute. Redan vid första ögonkastet är det tydligt att mycket har förändrats sedan den senaste utgåvan. Innehållet är ännu mer översiktligt utformat. För att du lättare ska kunna hitta rätt lösning för dig är produkterna indelade i fler kategorier än tidigare. Om en produkt kan användas vid läggning av flera golvtyper listas den under alla aktuella golvkategorier.
Systemstrukturen för läggning av enskilda golvtyper är samma som förut, men läsbarheten har förbättrats.
De olika kategorierna i produktöversikten motsvarar de som finns på internet:
I år finns Wakol för första gången representerade med två produkter på innovations@domotex2017 .
Wakol lanserar nya innovativa produkter på mässan DOMOTEX 2017 i Hannover 14–17 januari. Produkterna visas både inom ramen för innovations@domotex2017 och i Wakol och Lobas gemensamma monter i mässhall 7, A41.
WAKOL MS 325 Silanprimer - den första fuktspärren med MS-bas för ythärdning som kan appliceras med spatel eller roller
WAKOL MS 550 PVC- och Gummilim - det första 1K MS-limmet för PVC-designgolv
innovations@domotex2017 – innovationspristagare presenteras på internet. På temaområdet i mässhall 9 presenteras de mest innovativa nya produkterna. Under rubriken ”Applicerings- och läggningsteknik: Hur den senaste generationens teknik kan användas för att göra golvläggning snabbare och enklare” visar innovativa utställare upp sina nyheter. ”Vi har sett flera spännande produkter som kombinerar kreativt tänkande med intelligenta lösningar”, säger Stefan Diez, industri- och produktdesigner, och medlem i juryn.
Du hittar oss på följande mässor...
Vi har massor av roliga nyheter att visa dig!
Du hittar oss på följande mässor...
Vi har massor av roliga nyheter att visa dig!
Adhesive manufacturer WAKOL enters into strategic partnership with ARDEX Group which will ensure early company succession ...
Adhesive manufacturer WAKOL enters into strategic partnership with ARDEX Group which will ensure early company succession.
Ardex, specialist for building chemicals based in Witten, Germany acquires a majority interest in Wakol. Family owners who are currently active in the business continue to hold substantial shares.
With Ardex as partner Wakol strengthens its system expertise, its global footprint and therefore ensures a sustainable growth.
This cooperation holds big potential for for future growth for both companies.
Mark Eslamlooy, CEO of Ardex Group, is excited about the future together: “This cooperation with Wakol is a perfect way for us to increase our systems expertise in the flooring industry massively. I cannot imagine having a better partner because like Ardex Wakol stands for highest technical expertise, quality and innovation. This shared philosophy is the base for our future success.”
Wakol stays independent
Wakol continues to operate as independent entity. The current managing directors Christian Gross, Dr. Frederic Holzbaur, Dr. Martin Schäfer and Steffen Acker will continue to run the business. Company name, location, brand and sales strategy will not change. The point of contact for customers as well as suppliers will also stay the same.
Through this cooperation both companies will increase their expertise in the business segment flooring systems. Both brands will continue to focus on their existing distribution channels and invest in its further development. Also both companies will continue to offer their distinguished product portfolio under their own brand.
Wakols further business segments Industrial Adhesives and Sealing Compounds will also continue increase without change. The international network of the Ardex Group offers opportunities for growth there as well.
Christian Gross, CEO of the Wakol Group is convinced: „ With Ardex as partner we have a very promising prospective for the future and at the same time foster our culture as family owned business.“
Location in Pirmasens will be strengthened
Wakol’s current location in Pirmasens will be expanded to become Ardex’s development centre for flooring adhesives in Europe. It is also planned to expand Wakol’s existing manufacturing capacity into the Groups European production centre for flooring and industrial adhesives.
Base for a partnership are shared values like: quality, innovation, technical expertise, reliability as well as a clear strategic alignment. Strong similarities in the company culture are crucial prerequisites and guarantee the future success for the cooperation.
For more than 60 years, ARDEX has been the quality leader for an entire industry, offering excellent building chemicals with supreme processing reliability – the brand of choice for installers and wholesalers. ARDEX today is still an independent family-owned business. ARDEX is present in more than 50 countries around the world and has 2,200 employees. With its twelve major brands, the ARDEX Group generates total turnover worldwide of more than 540 million euros per year.
Wakol GmbH is a leading family owned business in the adhesive industry as well as in the packaging industry with a total turnover of 58 million Euros. In 2014 Wakol achieved a growth of 5.5%.
Wakol, headquartered in Pirmasens, Germany continuously increased the number of employees over the recent years to currently 190 employees. 160 of that are based in Pirmasens.
Besides Germany, Austria, Switzerland and the Netherlands which are core markets for Wakol’s flooring products Wakol is also active in USA and Poland.
Wakol develops, manufactures and distributes very successful Flooring products, industrial adhesives and sealing compounds. For 80 years Wakol stands for Quality and Customer service. Wakol was repeatedly able to develop industry changing innovations. The chosen markets and niches provide excellent opportunities for future growth.
Ledande dispersionsprimer för ledande golvläggning i PVC-, textil-, linoleum- och gummigolv. WAKOL DL 3078 ersätter läggning av kopparbandsnät.