Wakol Sealing Compounds

for Food Round

Método de aplicação

  • Suitable for common lining systems

  • Suitable for all common feeding systems

Filling/Packaging

  • Optimized for demanding closing conditions

    • Vacuum-, steam and hot filling

    • Pasteurisation and sterilization

  • Good pressure, temperature and steam resistance

Advantages

  • Good to very good adhesion on all common lacquers

  • Shelf life: 10 months

Additional Information

  • Food contact approved

  • Suit Food

  • Biotest

Food products - Advanced technology

All WAKOL Sealing Compounds with advanced technology++ are proactively designed even to meet tomorrows regulatory challenges.

These are products

  • without usage of mineral oil based plasticizers or film formation aids (no MOSH/MOAH)

  • with very low extraction profile and low occurrence of NIAS

  • styrene free formulated

All WAKOL Sealing Compounds with advanced technology+ are proactively designed for upcoming regulatory challenges.

These are products

  • without usage of mineral oil based plasticizers or film formation aids (no MOSH/MOAH)

  • with very low extraction profile and low occurrence of NIAS

VAE (vinyl acetate ethylene) based products

VAE (vinyl acetate ethylene) based products

Special Advantages

  • Very good fat & oil resistance

  • Suitable for hot oil filling

  • Styrene free

Special Advantages

  • Suitable for slow- to high-speed liners

  • Excellent water resistance

  • Good adhesion on all common lacquers

  • Suitable for electrocoating as post-repair process

  • Highly cost-efficient

  • NIAS: very low level

Properties range

  • Solid content: 59%

  • Viscosity (WPV 74): 480 mPas

  • Density dry: 1,40 g/cm³

  • Density wet: 1,26 g/cm³

  • Colour: grey

Additional Information 

  • Certificate available

    • Regulation (EC) 1935/2004/EG

    • FDA 21 CFR 175.300

    • Mercosur

    • Brazilian Resolution RDC

    • CH-Bedarfsgegenständeverordnung

  • NIAS screening


Special Advantages 

  • Suitable for slow- to high-speed liners

  • Good water resistance

  • Good adhesion on all common lacquers

  • Suitable for electrocoating as post-repair process

  • Highly cost-efficient

  • NIAS: very low level

Properties range

  • Solid content: 40-59%

  • Viscosity (WPV 74): 310-480 mPas

  • Density dry: 1,37-1,50 g/cm³

  • Density wet: 1,17-1,26 g/cm³

  • Colour: grey

Additional Information 

  • Certificate available

    • Regulation (EC) 1935/2004/EG

    • FDA 21 CFR 175.300

    • Mercosur

    • Brazilian Resolution RDC

    • CH-Bedarfsgegenständeverordnung

  • NIAS screening


SBR (styrene butadiene rubber) based products

SBR (styrene butadiene rubber) based products

Special Advantages

  • High water resistance

  • Steam closing and hot filling possible

Special Advantages 

  • Suitable for medium- to high-speed liners including multi-head liners

  • Very good adhesion on all common lacquers

  • Suitable for electrocoating as post-repair process

  • Cost-efficient

Properties range

  • Solid content: 60%

  • Viscosity (WPV 74): 400 mPas

  • Density dry: 1,35 g/cm³

  • Density wet: 1,17 g/cm³

  • Colour: grey

Additional Information 

  • Certificate available

    • Regulation (EC) 1935/2004/EG

    • FDA 21 CFR 175.300

    • Mercosur

    • Brazilian Resolution RDC


Special Advantages 

  • Suitable for slow- to high-speed liners

  • Good adhesion on all common lacquers

  • Good fat and oil resistance

  • Highly cost-efficient

  • Free from white oils/gum-rosin derivates

  • NIAS: low level

Properties range

  • Solid content: 52-60%

  • Viscosity (WPV 74): 350-500 mPas

  • Density dry: 1,55 g/cm³

  • Density wet: 1,23-1,28 g/cm³

  • Colour: grey

Additional Information 

  • Certificate available

    • Regulation (EC) 1935/2004/EG

    • FDA 21 CFR 175.300

    • Mercosur

    • Brazilian Resolution RDC

  • NIAS screening


Special Advantages 

  • Suitable for medium- to high-speed liners including multi-head liners

  • Very good adhesion on all common lacquers

  • Long-term market experience

Properties range

  • Solid content: 60%

  • Viscosity (WPV 74): 400-500 mPas

  • Density dry: 1,51 g/cm³

  • Density wet: 1,27 g/cm³

  • Colour: grey

Additional Information 

  • Certificate available

    • Regulation (EC) 1935/2004/EG

    • FDA 21 CFR 175.300

    • Mercosur

    • Brazilian Resolution RDC

  • NIAS screening